FEW Radiator Cap R-125 With Valve *Origin from Japan
RM 16.00
In Stock
SKU: R-125
FEW Radiator Cap is a high-pressure type that increases the pressure inside the radiator, thus raising the coolant boiling point and increasing cooling efficiency.
Product model : R125
Made in Japan
Suitable for most Proton/Honda/Toyota Car Models.
- For more info, Please contact us to avoid order wrongly -
Why to Replace a Radiator Cap
While a simple component of your cooling system, your radiator cap plays a crucial role in maintaining your vehicle’s cooling efficiency. Radiator caps are cheap, easy to find and take only a few seconds to replace, but ignoring a faulty one can cause overheating problems and potential engine damage, especially during the hot summer months.
A radiator cap generally contains a spring loaded plunger, and this plunger serves two purposes in your cooling system.
First, should internal pressures exceed the spring pressure of the plunger, coolant will be diverted to an overflow reservoir.
This is important because if this simple feature did not exist, pressure would simply continue to build, causing sudden leaks or even explosions as the building pressure desperately tries to find a way to relieve itself. Second, this spring pressure helps to maintain a specific pressure inside your cooling system. As atmospheric pressure rises, the boiling point of a fluid also rises. Boiling fluid isn’t very good at transferring heat, so by increasing the pressure inside the system, you increase the amount of heat the cooling system can remove before it begins to boil.
Replacement Tips
Replacing the cap on your radiator is an easy thing to do and may only require a few seconds of your time. It is extremely important to always make sure to allow the engine to cool down before removing the radiator cap, as removing the cap from a hot system can cause sudden coolant spray and severe burns. Pay close attention to the pressure rating on your cap, and select one with the same pressure rating. Once you have a replacement and your engine is cool, simply unscrew the old cap, and install the new by screwing it on.
A faulty radiator cap can have a huge impact on the cooling performance of your vehicle. If your coolant is boiling at even normal temperatures, or you seem to be having problems with your coolant moving back and forth between the cooling system and your overflow tank, consider taking a look at your radiator cap. Replacements are cheap and easy to obtain and can sometimes be the simplest solution to radiator overheating problems. While a cap may be easy to replace however, it is not a substitute for proper radiator maintenance. Proper coolant changes and cleaning are key components to a healthy cooling system.
Product model : R125
Made in Japan
Suitable for most Proton/Honda/Toyota Car Models.
- For more info, Please contact us to avoid order wrongly -
Why to Replace a Radiator Cap
While a simple component of your cooling system, your radiator cap plays a crucial role in maintaining your vehicle’s cooling efficiency. Radiator caps are cheap, easy to find and take only a few seconds to replace, but ignoring a faulty one can cause overheating problems and potential engine damage, especially during the hot summer months.
A radiator cap generally contains a spring loaded plunger, and this plunger serves two purposes in your cooling system.
First, should internal pressures exceed the spring pressure of the plunger, coolant will be diverted to an overflow reservoir.
This is important because if this simple feature did not exist, pressure would simply continue to build, causing sudden leaks or even explosions as the building pressure desperately tries to find a way to relieve itself. Second, this spring pressure helps to maintain a specific pressure inside your cooling system. As atmospheric pressure rises, the boiling point of a fluid also rises. Boiling fluid isn’t very good at transferring heat, so by increasing the pressure inside the system, you increase the amount of heat the cooling system can remove before it begins to boil.
Replacement Tips
Replacing the cap on your radiator is an easy thing to do and may only require a few seconds of your time. It is extremely important to always make sure to allow the engine to cool down before removing the radiator cap, as removing the cap from a hot system can cause sudden coolant spray and severe burns. Pay close attention to the pressure rating on your cap, and select one with the same pressure rating. Once you have a replacement and your engine is cool, simply unscrew the old cap, and install the new by screwing it on.
A faulty radiator cap can have a huge impact on the cooling performance of your vehicle. If your coolant is boiling at even normal temperatures, or you seem to be having problems with your coolant moving back and forth between the cooling system and your overflow tank, consider taking a look at your radiator cap. Replacements are cheap and easy to obtain and can sometimes be the simplest solution to radiator overheating problems. While a cap may be easy to replace however, it is not a substitute for proper radiator maintenance. Proper coolant changes and cleaning are key components to a healthy cooling system.
